LloydRoc Rockwool -HR INT Panel
For Internal Walls And Ceilings
Applications
Specifications
Fixing
Projects
Properties
For Internal Walls And Ceilings
Specifications Data
| Top Sheet Profile | Plain sheet with slight ribbed profile for HR 1 INT and plain sheet for HR INT profile |
| Bottom Sheet Profile | Plain sheet with slight ribbed profile for HR 1 INT and plain sheet for HR INT profile |
| Panel Thickness | 50mm, 80mm,100mm & 120mm |
| Facing Material |
240 MPa Gl with 180 GSM Zn Coating / Stainless Steel / |
| Facing Material Thickness | 0.5/0.6/0.7 mm TCT |
| Facing Material Coating | DFT 20 microns colour coated RMP/SMP/PVDF coating over 5 micron primer. |
Fixing
- LLloydroc Rockwool HR INT Panel shall have tongue and groove joint and shall be fixed on the channels on the floor and on to suitable structure with flashings
- Lloydroc Rockwool HR INT Panel shall be supplied in upto 1 m effective width and in single length upto 12 m without any joints depending on site requirements.
Applied locations
| Properties | Rockwool |
|---|---|
| INSULATION | HIGH DENSITY LAMELLAR ROCKWOOL/ MINERAL WOOL |
| Overall Density | 100+/-15 kg/cu.m |
| Thermal Conductivity (K-Value) at 10°C mean Temp. | 0.040 W/m°K - Max. |
| Compressive Strength | 50 KPa (Parallel to MW - Lamellar Dir.) Min. |
| Shear Strength | 75 KPa (Parallel to MW - Lamellar Dir.) Min. |
| Dimensional Stability at +100°C Hot Temp. | ±2% |
| Water absorption | Absorbs less than 1% as per BS 2972:75 |
| Melting Point of Rockwool | >1000°C |
| Application Temp Range | -30°C to 250°C |
| Sound Reduction | Transmission Losses 28 to 30 db |
| FIRE PROPERTIES AS PER DIN 4102 | A1/A2 |
| a. Ignitability | Not easily ignitable - BS 476 part 5 |
| b. Surface spread of flame | Class 1 - BS 476 part 7 |
| c. Combustibility | Non combustible - BS 476 part 4 |
Kick start your
project today
We are a one-stop multi-disciplinary solution provider specialising in supplying, contracting and manufacturing of insulation, refractory, pre-insulated sandwich panels, pre-engineered buildings, metallic profiled sheets, fire-proofing and mechanical erection works.