LloydRoc Rockwool -HR Panel
For Partitions / Hot Rooms / Driers
Specifications
Fixing
Projects
Properties
Specifications Data
| Top Sheet Profile | Plain sheet with slight ribbed profile for HR 1 and plain sheet for HR profile |
| Bottom Sheet Profile | Plain sheet with slight ribbed profile for HR 1 and plain sheet for HR profile |
| Panel Thickness | 50mm, 80mm,100mm & 120mm |
| Facing Material |
240 Mpa GI with 180 GSM Zn coating / Stainless steel 300 Mpa Galvalume Steel with 150 GSM Alu-Zn coating |
| Facing Material Thickness | 0.4/0.5/0.6/0.7 mm TCT |
| Facing Material Coating | DFT 20 microns colour coated RMP/SMP/PVDF coating over 5 micron primer. |
Fixing
- Lloydroc HR Panel shall have tongue and groove joint and shall be fixed on the channels on the floor and on to suitable structure with flashings
- Lloydroc HR Panel shall be supplied in upto 1 m effective width and in single length upto 12 m without any joints depending on site requirements.
Applied locations
Kick start your
project today
We are a one-stop multi-disciplinary solution provider specialising in supplying, contracting and manufacturing of insulation, refractory, pre-insulated sandwich panels, pre-engineered buildings, metallic profiled sheets, fire-proofing and mechanical erection works.