LloydRoc Rockwool -TR Panel
For Roofing & Cladding Application
Applications
Specifications
Fixing
Projects
Properties
For Roofing & Cladding Application
Specifications Data
Top Sheet Profile | LLOYD TR Trapezoidal profiled sheet |
Bottom Sheet Profile | Plain sheet with slight ribs |
Panel Thickness | 50 mm, 80 mm & 100 mm |
Facing Material |
240 MPa Gl with 180 GSM Zn Coating / 300 MPa Galvalume Steel with 150 GSM Alu-Zn Coating |
Facing Material Thickness | 0.4/0.5/0.6/0.7 mmTCT |
Facing Material Coating | DFT 20 microns colour coated RMP/SMP/PVDF coating over 5 micron primer. |
Fixing
- Lloydroc TR Panel shall be fixed on to the Purlin / Girt with hot dipped galvanized imported self drilling fasteners with EPDM washers and with necessary overlap as per manufacturer's specification.
- Lloydroc TR Panel shall be supplied in upto 1 m effective width and in single length upto 12 m without any joints depending on site requirements.
Applied locations
Properties | Rockwool |
---|---|
INSULATION | HIGH DENSITY LAMELLAR ROCKWOOL/ MINERAL WOOL |
Overall Density | 100+/-15 kg/cu.m |
Thermal Conductivity (K-Value) at 10°C mean Temp. | 0.040 W/m°K - Max. |
Compressive Strength | 50 KPa (Parallel to MW - Lamellar Dir.) Min. |
Shear Strength | 75 KPa (Parallel to MW - Lamellar Dir.) Min. |
Dimensional Stability at +100°C Hot Temp. | ±2% |
Water absorption | Absorbs less than 1% as per BS 2972:75 |
Melting Point of Rockwool | >1000°C |
Application Temp Range | -30°C to 250°C |
Sound Reduction | Transmission Losses 28 to 30 db |
FIRE PROPERTIES AS PER DIN 4102 | A1/A2 |
a. Ignitability | Not easily ignitable - BS 476 part 5 |
b. Surface spread of flame | Class 1 - BS 476 part 7 |
c. Combustibility | Non combustible - BS 476 part 4 |
Kick start your
project today
We are a one-stop multi-disciplinary solution provider specialising in supplying, contracting and manufacturing of insulation, refractory, pre-insulated sandwich panels, pre-engineered buildings, metallic profiled sheets, fire-proofing and mechanical erection works.